| EG 751PCB | ||||||||||||||||||
| Processor
Description The Hope/Carnfeldt EG 751PCB processor is configured for optimum film handling and development for the printed circuit board industry. Modular Construction The Hope/Carnfeldt EG processor is of modular construction, which allows you to choose between four different tank capacities. Deep tanks and long rack lengths determine the process speed and contribute to an even density. Installation is easy as the Hope/ Carnfeldt EG processor can be split into two sections, which easily pass through doors. Easy Maintenance Working Environment |
Celis Control This advanced electronic control system is simple to operate through an icon based graphic screen with function keys. The system controls and displays developer and fixer temperatures, replenishment, antioxidation, developing time, low liquid levels and no-feed indication. A power save function automatically reduces power and water consumption after completion of each processing cycle. During nights and weekends a night and day programmable timer mode system reduces consumption further, however, keeping the processor ready to operate without any delay. The safety level control system will cut off heat and automatically refill each tank if a low liquid level is detected. Diagnostic features in the computer control will tell the operator how to rectify error conditions both in case of hardware problems and external problems e.g. overflow in waste containers. The Celis control contributes to secure a reliable transport of film and a trouble free production. If the processor is used as on-line processor the Celis Control can also be used as the intelligent communication link between the film plotter and the Hope/Carnfeldt on-line processor and it is designed to ensure an optimum utilization of the capacity of the film plotter. Low temperature dryer EG751PCB has a specially designed dryer which operates as low as 35degrees at 45 sec developing time, depending on film and chemistry. The low temperature guarantees dimensional stability of your phototool. |
|||||||||||||||||
| Technical specifications | ||||||||||||||||||
| Dimensions of
processor incl. receiving tray Length Width Height |
210 cm/83.0" 107 cm/43.0" 110-115cm/44.0"-46" |
|||||||||||||||||
| Shipping
Dimensions Length Width Height |
145 cm/57.0" 142 cm/56.0" 129 cm/51.0" |
|||||||||||||||||
| Weight Net Gross |
340 kg/750 lb. 440 kg/970 lb. |
|||||||||||||||||
| Specifications Inlet width (processor) Tank capacity (rack mounted) Rack length dev. Developing time min. – max. Speed at 30. sec. dev. time Max. film length off-line Min. film size off-line Dev./fix./wash temperature range Exhaust blower Exhaust connection Circulation rate dev., fix., wash Water consumption (operate) Emission of heat to room (operate) Water connection Drain connection Replenishment containers Max. power consumption Average power consumption: Operate Power save Night mode Power supply: 1 x 230ACV +/-10% / 50/60 Hz 3 x 230ACV +/-10% / 50/60 Hz Standard accessories: - Receiving tray - Drip tray for racks - Feed tray on front of processor - Filters on fixer, developer and wash - Two replenishment containers each 30 l |
75 cm/29" 26.5 l/7.0 US gal. 44.0 cm/17.3" 15-90 sec. 88 cm/min./34.6"/min. 10 m/32.8 ft 18 x 10 cm/7 x 4" 20-45°C/68-113°F Built in, 200m3/hour Ø 10 cm3.94" 22 l/min./5.8 US gal. 0.1 - 9 l/m2. 2300 W/674 BTU/hr ¾" pipe thread 3 x 1" hose nipple Dev./fix. 30 l/8 US gal. 5900 VA 5000 W 1000 W 600 W 30 amp 3 x 16 amp |
|||||||||||||||||
| Plotter resolution | >4000 |
|||||||||||||||||
| Accessories | Order no. | |||||||||||||||||
| Pump kit for filter EG | 320468 | |||||||||||||||||
| Chemical mixer | 305581 | |||||||||||||||||
| Double filter with pump for developer | 320465 | |||||||||||||||||
| Waste container 30 l w/alarm for max. level | 305569 | |||||||||||||||||
| Daylight inlet kit | 315709 | |||||||||||||||||
| Floor drip tray | 320291 | |||||||||||||||||
| Rack hoist | 315017 | |||||||||||||||||
| Rack hoist fixing brackets set | 305199 | |||||||||||||||||
| Lifting bar for rack hoist | 128752 | |||||||||||||||||
| Mobile rack drip tray | 129850 | |||||||||||||||||
| Darkwall panels | 128386 | |||||||||||||||||
| Daylight cassette | 320650 | |||||||||||||||||
| Water inlet filter kit | 217759 | |||||||||||||||||
| Dev. repl. container 30 l with level alarm | 305549 | |||||||||||||||||
| Fix. repl. container 30 l with level alarm | 305559 | |||||||||||||||||
| Level alarm sensor (low) | 305529 | |||||||||||||||||
| Level alarm sensor (full) | 305530 | |||||||||||||||||
| Installation kit | 217659 | |||||||||||||||||
| Product illustration | ||||||||||||||||||
 Installation drawing 54 KB  Product leaflet 4 MB List of accessories 361 KB For printed leaflets please contact |
To download product illustrations (PDF), you need the Adobe Acrobat Reader software.
|
|||||||||||||||||
| Specifications are subject to be changed without prior notice and we assume no responsibility for possible errors or omissions in the text. Actual achievable production speed depends on exposure, film type and chemistry, and the drying capacity is influenced by temperature, humidity, exhaust system and film type. | ||||||||||||||||||
|
||||||||||||||||||
