EG 900PCB
Processor Description
The Hope/Carnfeldt EG 900PCB processor is configured for optimum film handling and development for the printed circuit board industry.

Modular Construction
 The Hope/Carnfeldt EG processor is of modular construction, which allows you to choose between different tank capacities. Deep tanks and long rack lengths determine the process speed and contribute to an even density. 

Easy Maintenance
The Hope/Carnfeldt processor is easy to maintain. The easy access for regular cleaning ensures a long lifespan and trouble free functioning of the processor. To ease the maintenance of the processor accessories such as rack hoist and floor drip tray can be ordered separately.

Working Environment
The clean design and the low noise level of the processor fit into today’s modern working environment. The processor is supplied with an effective exhaust fan for removal of chemical fumes from the conveyor, processor and installation site.

Celis Control
This advanced electronic control system is simple to operate through an icon based graphic screen with function keys.The system controls and displays developer and fixer temperatures, replenishment, antioxidation, developing time, low liquid levels and no-feed indication. A power save function automatically reduces power and water consumption after completion of each processing cycle.During nights and weekends a night and day programmable timer mode system reduces consumption further, however, keeping the processor ready to operate without any delay. The safety level control system will cut off heat and automatically refill each tank if a low liquid level is detected. Diagnostic features in the computer control will tell the operator how to rectify error conditions both in case of hardware problems and external problems e.g. overflow in waste containers. The Celis control contributes to secure a reliable transport of film and a trouble free production. If the processor is used as on-line processor the Celis Control can also be used as the intelligent communication link between the film plotter and the Hope/Carnfeldt on-line processor and it is designed to ensure an optimum utilization of the capacity of the film plotter.

Technical specifications

Dimensions (incl. receiving tray)
Length
Width
Height
165 cm/65.0"
123 cm/49.0"
110-115 cm/44.0"-46"
Shipping Dimensions
Length
Width
Height
145 cm/57.0"
142 cm/56.0"
125 cm/49.0"
Weight
Net
Gross
240 kg/530 lb.
340 kg/750 lb
Specifications
Inlet width (processor)
Tank capacity (rack mounted)
Rack length dev.
Developing time min. – max.
Speed at 30. sec. dev. time
Max. film length off-line
Min. film size off-line
Dev./fix./wash temperature range
Exhaust blower
Exhaust connection
Circulation rate dev. and fix.
Circulation rate wash
Water consumption (operate)
Emission of heat to room (operate)
Water connection
Drain connection
Replenishment containers
Max. power consumption
Average power consumption:
Operate
Power save
Night mode
Power supply:
1 x 230ACV +/-10% / 50/60 Hz
3 x 230ACV +/-10% / 50/60 Hz


Standard accessories:
- Receiving tray
- Drip tray for racks
- Feed tray on front of processor
- Filters on fixer and developer 
- Two replenishment containers each 30 l
91 cm/36"
29 l/7.6 US gal.
32.0 cm/12.6"
20-80 sec.
64 cm/min./25.2"/min.
5 m/16.4 ft
18 x 10 cm/7 x 4"
20-45°C/68-113°F
Built in, 60m3/hour
Ø 10 cm/3.9"
10 l/min./2.7 US gal.
-
0.1 - 9 l/m2.
2000 W/586 BTU/hr
¾" pipe thread
3 x 1" hose nipple
Dev./fix. 30 l/8 US gal.
3450 VA

3100 W
1000 W
600 W

16 amp
-
Plotter resolution 4000<

Accessories Order no.

Pump kit for filter EG 320468
Chemical Mixer 305581
Double filter with pump for developer 320464
Waste container 30 l w/alarm f. max. level 305569
Floor drip tray 320291
Rack hoist 320019
Rack hoist fixing brackets set 305299
Lifting bar for rack hoist 320056
Mobile rack drip tray 136850
Daylight inlet kit 320713
Darkwall panels 136386
Daylight cassette 320650
Water inlet filter kit 217759
Dev. repl. container 30 l with level alarm 305549
Fix. repl. container 30 l with level alarm 305559
Level alarm sensor (low) 305529
Level alarm sensor (full) 305530
Installation kit 217659

Product illustration



Installation drawing 64 KB


Product leaflet 4 MB


List of accessories 361 KB

For printed leaflets please contact
Echo Graphic.
To download product illustrations (PDF), you need the Adobe Acrobat Reader software.
Specifications are subject to be changed without prior notice and we assume no responsibility for possible errors or omissions in the text. Actual achievable production speed depends on exposure, film type and chemistry, and the drying capacity is influenced by temperature, humidity, exhaust system and film type.
ECHO GRAPHIC A/S • HAANDVAERKERVEJ 2 • DK-9560 HADSUND • DENMARK • PHONE +45 98 57 19 55 • FAX +45 98 57 15 91