EP 1140 Camera Processor
Processor Description
The Hope/Carnfeldt Camera Processor is designed to process polyester plate from the CP-Multi 1100 reproduction machine.

Easy Maintenance
The Hope/Carnfeldt processor is easy to maintain. The easy access for regular cleaning ensures a long lifespan and troublefree functioning of the processor.

To ease the maintenance of the processor accessories such as rack hoist, filter kits and drip trays can be ordered separately.

Technical Features
The Hope/Carnfeldt EP processors for polyester plates are equipped with racks which are designed specially for different types of polyester plates.
The powerful circulation pumps give an even, overall agitation guaranteeing the correct chemical flow over the full emulsion surface. Correct rinsing is accomplished with minimum water consumption and a reliable replenishment system provides fresh chemistry into the baths. The processor has separate developer, fixer and wash drains and is easily adapted for silver recovery systems and water treatment systems.

Working Environment
The clean design and the low noise level of the processor fit into today’s modern working environment. The processor is supplied with an effective exhaust fan for removal of chemical fumes from the  processor and installation site. 

In case of power failure the top lid above wet section is lifted to ventilate condensation.

 Celis Control
In order to meet the increased demand to the final result, Echo Graphic has developed the Celis Control.
The Celis Control contributes to secure a reliable transport of polyester plates and a trouble free production.This advanced electronic control system is simple to operate through an icon based graphic screen with function keys.
The system controls and displays developer and fixer temperatures, replenishment, antioxidation, developing time, low liquid levels and no-feed indication.
A power save function automatically reduces power and water consumption after completion of each processing cycle.
During nights and weekends a night and day programmable timer mode system reduces consumption further, however, keeping the processor ready to operate without any delay.
The safety level control system will cut off heat and automatically refill each tank if a low liquid level is detected.
J informs that everything is ok and that the processor is ready and L informs the operator if an error occurs.
Diagnostic features in the computer control will tell the operator how to rectify error conditions both in case of hardware problems and external problems e.g. overflow in waste containers.

 
Technical specifications
Dimensions of complete on-line system
Length
Width
Height
275 cm/108.3"
202 cm/79.5"
110 cm/43.3"
Shipping Dimensions
Length
Width
Height
175 cm/68.8"
142 cm/55.9"
129 cm/50.8"
Weight
Net
Gross
370 kg/816 lb.
470 kg/1036 lb.
Specifications
Inlet width (processor)
Tank capacity (rack mounted)
Rack length dev.
Developing time min. – max.
Speed at 30. sec. dev. time
Max. film length off-line
Min. film size off-line
Max.format (set by imagesetter)
Dev./fix./wash temperature range
Exhaust blower
Exhaust connection
Circulation rate dev., fix., wash
Water consumption (operate)
Emission of heat to room (operate)
Water connection
Drain connection
Replenishment containers
Max. power consumption
Average power consumption
Power save
Night mode
Power supply:
1 x 230ACV +/-10% / 50/60 Hz
3 x 230ACV +/-10% / 50/60 Hz

* Level alarm sensor is standard in 
   repl. container.
114 cm/44.9"
18 l/7.9 US gal.
20.0 cm/7.9"
15-90 sec.
60 cm/min.23.6"/min.
2 m/6.6 ft
30 x 42 cm/11.8 x 16.5"
108 x 86 cm/42.5 x 33.9"
20-45°C/68-113°F
Built in
Ø 10 cm/4"
10 l/min./2.7 US gal.
3.5 l/min./0.9 US gal.
3000 W
¾" pipe thread
3x1" hose nipple
Dev./fix. 30 l/8 US gal.
5900 VA
5000 W
1000 W
600 W

30 amp
3 x 16 amp
Accessories Order no.
Pump kit for filter EG 315468 / 320468
Receiving tray complete 330469
Drip tray for racks 330643
Floor drip tray 330291
Rack hoist 330019
Rack hoist fixing brackets set 305198
Lifting bar for rack hoist 330006
Mobile rack drip tray 330850
Filter with pump for wash 128157
Filter cartridge developer/fixer 10µ 75119
Filter cartridge developer/fixer 25µ 75117
Filter cartridge developer/fixer 1µ 75118
Filter cartridge wash 20µ 5gr 75108
Water inlet filter kit 217759
Exhaust blower 250199
Developer replenish container 30 l. SU 217049
Fixer replenish container 30 l. SU 217059
Developer replenish container 70L 68844
Fixer replenish container 70L 68521
Dev. repl. container 30 l with level alarm 305549
Fix. repl. container 30 l with level alarm 305559
Trolley for replenishment containers 305600
Installation kit 217659
Chilling unit dip tube 217516
Product illustration

Installation drawing 121 KB

To download product illustrations (PDF), you need the Adobe Acrobat Reader software.
Specifications are subject to be changed without prior notice and we assume no responsibility for possible errors or omissions in the text. Actual achievable production speed depends on exposure, film type and chemistry, and the drying capacity is influenced by temperature, humidity, exhaust system and film type.
ECHO GRAPHIC A/S • HAANDVAERKERVEJ 2 • DK-9560 HADSUND • DENMARK • PHONE +45 98 57 19 55 • FAX +45 98 57 15 91