EG 901 on-line Purup-Eskofot B2 CtP, film

Processor Description
Hope/Carnfeldt on-line processors are designed to operate as a complete integrated system with the Purup-Eskofot ImageMakers.

Easy Maintenance
The Hope/Carnfeldt processor is easy to maintain. The easy access for regular cleaning ensures a long lifespan and troublefree functioning of the processor.

To ease the maintenance of the processors
Echo Graphic has developed accessories as rack hoist, filter kits and drip trays.

Working Environment
The clean design and the low noise level of the processor fit into today´s modern working environment. The processor is equipped with an effective exhaust fan for removal of chemicals fumes from the processor and installation site. The exhaust fan is switched on continuously to prevent chemical fumes from travelling into the ImageMaker.

Technical Features
The racks are built after the principle "staggered rollers", which has proven to be the most reliable rack construction on the market. The staggered rollers configuration ensures reliable transport of the film, polyester and paper through the processing cycle. The powerful circulation pumps give an even, overall agitation securing the correct chemical flow over the full emulsion surface. Correct rinsing is accomplished with minimum water consumption and a reliable replenishment system provides the baths with fresh chemistry. The processor has separate developer, fixer and wash drains and is easily adapted for silver recovery systems and water treatment systems.

 Celis Control
The intelligent communication link between the ImageMaker and the processor ensures an optimum utilization of the capacity of the ImageMaker. The processor is equipped with an advanced electronic control system, which is easy to operate through an icon based graphic screen with function keys. The system controls and displays developer and fixer temperatures, replenishment, antioxidation, developing time, low liquid levels and no-feed indication. A power save function automatically reduces power and water consumption after completion of each processing cycle.

During nights and weekends, a night and day programmable timer mode system reduces consumption further, however keeping the processor ready to operate without any delay. A safety level control system will cut off heat and automatically refill each tank if a low liquid level is detected. A special link tells the ImageMaker when to feed material and when the processor is ready. J informs that everything is ok and that the processor is ready and L informs the operator and the ImageMaker if an error occurs.

Diagnostic features in the computer control will tell the operator how to rectify error conditions both in case of hardware problems and external problems e.g. overflow in waste container.

Modular Construction
The Hope/Carnfeldt processor is of a modular construction, which allows you to choose between three different tank capacities. Long rack lengths and deep tanks and determine the process speed and capacity and contribute to an even density.

Installation is easy as the processor can be split into two sections, which easily pass through doors, etc.

Technical specifications

Dimensions of complete on-line system
(incl. receiving basket)
Length
Width
Height

223 cm/87.8"
217 cm/85.4"
140 cm/55.1"
Shipping Dimensions
Length
Width
Height
133 cm/52.4"
142 cm/56.0"
129 cm/50.8"
Weight
Net
Gross
300 kg/662 lb.
405 kg/893 lb.
Specifications
Inlet width (processor)
Tank capacity (rack mounted)
Rack length dev.
Developing time min. – max.
Speed at 30. sec. dev. time
Max. film length off-line
Min. film size off-line
Max. format (set by imagesetter)
Dev./fix./wash temperature range
Exhaust blower
Exhaust connection
Circulation rate dev., fix., wash
Water consumption (operate)
Emission of heat to room (operate)
Water connection
Drain connection
Replenishment containers
Max. power consumption
Average power consumption
Power save
Night mode
Power supply:
1 x 230ACV +/-10% / 50/60 Hz
3 x 230ACV +/-10% / 50/60 Hz
91 cm/36"
39 l/10.3 US gal.
16.0 cm/6.3"
15-60 sec.
48 cm/min./18.9"/min.
2 m/6.5 ft
A4
86 x 121 cm/33.9 x 47.6"
20-45°C/68-113°F
Built in
Ø 10 cm/4"
22 l/min./5.8 US gal.
3.5 l/min./0.9 US gal.
3000W/674 BTU/hr
¾"MPT
3 x 1" hose nipple
Dev./fix. 30 l/8 US gal.
7900 VA
5700 W
3500 W
1100 W

40 amp
3 x 16 amp

Accessories Order no.

Double filter with pump for developer 320465
Filter with pump for developer or fixer 136147
Water inlet filter kit 217759
Daylight inlet kit for Purup-Eskofot B2 136877
Daylight off-line cassette kit for Purup-Eskofot B2 136887
Receiving tray/flip 136807
Drip tray for racks 320043
Floor drip tray 320291
Trolley for replenishment containers 305600
Rack hoist 320009
Rack hoist fixing brackets set 305199
Lifting bar for rack hoist 320056
Mobile rack drip tray 136850
Filter cartridge developer/fixer 10U 75119
Filter cartridge developer/fixer 25U 75117
Filter cartridge developer/fixer 1U 75118
Filter cartridge wash 20U 5gr 75108
Trolley for replenishment containers 305600
Dev. repl. container 30 l with level alarm 305549
Fix. repl. container 30 l with level alarm 305559
Level alarm sensor (low) 305529
Level alarm sensor (full) 305530

Product illustration



Installation drawing 84 KB
Product leaflet 810 KB

For printed leaflets please contact
Echo Graphic.
To download product illustrations (PDF), you need the Adobe Acrobat Reader software.
Specifications are subject to be changed without prior notice and we assume no responsibility for possible errors or omissions in the text. Actual achievable production speed depends on exposure, film type and chemistry, and the drying capacity is influenced by temperature, humidity, exhaust system and film type.

ECHO GRAPHIC A/S • HAANDVAERKERVEJ 2 • DK-9560 HADSUND • DENMARK • PHONE +45 98 57 19 55 • FAX +45 98 57 15 91