EGP 901 on-line Dolev 800V
Processor Description
The Hope/Carnfeldt on-line processor is designed to operate as a complete integrated system with the Dolev imagesetter.

Modular Construction
The EGP Combi on-line processor consists of:

  • On-line conveyor and electronic interface communication between the imagesetter and the Hope/Carnfeldt Combi on-line processor.
  • Developer section for film.
  • Developer section for polyester plates.
  • Dryer section.

Installation is easy as the processor can be split into three sections, which easily pass through doors.

Technical Features
The Hope/Carnfeldt EGP Combi on-line processor is designed to work on-line for normal film and polyester plates in one and same processor. The film racks are built after the principle "staggered rollers", which has proven to be the most reliable rack construction on the market. The racks for polyester plates are designed specially for different types of polyester plates. Based on the signal from the imagesetter the Combi on-line processor will guide the film/polyester plate to the correct developer section in the processor. After development the film/polyester plate will automatically be transported to the dryer section.

 Celis Control
In order to meet the requirements of a market with faster and faster imagesetters as well as an increased demand to the final result, Echo Graphic has developed the Celis Control.
The Celis Control is the intelligent communication link between the imagesetter and the Hope/Carnfeldt on-line processor and it is designed to ensure an optimum utilization of the capacity of the imagesetter. The Celis Control contributes to secure a reliable transport of film/polyester plates and a trouble free production.This advanced electronic control system is simple to operate through an icon based graphic screen with function keys.
The system controls and displays developer and fixer temperatures, replenishment, antioxidation, developing time, low liquid levels and no-feed indication.
A power save function automatically reduces power and water consumption after completion of each processing cycle.
During nights and weekends a night and day programmable timer mode system reduces consumption further, however, keeping the processor ready to operate without any delay.
The safety level control system will cut off heat and automatically refill each tank if a low liquid level is detected.
A special link tells the imagesetter when to feed material and when the processor is ready. J informs that everything is ok and that the processor is ready and L informs the operator and the imagesetter if an error occurs.
Diagnostic features in the computer control will tell the operator how to rectify error conditions both in case of hardware problems and external problems e.g. overflow in waste containers
Technical specifications
Dimensions of complete on-line system
(incl. receiving basket)
Length
Width
Height

349 cm/137.4"
165 cm/65.0"
123 cm/48.4"
Shipping Dimensions
Length
Width
Height
228 cm/88.8"
142 cm/55.9"
129 cm/50.8"
Weight
Net
Gross
540 kg/1190 lb.
680 kg/1500 lb.
Specifications
Inlet width (processor)
Tank capacity - film section (rack mounted)
Tank capacity - polyester section (racks mounted)
Rack length dev. - film section
Rack length dev. - polyester section
Developing time min. – max.
Speed at 30 sec. dev. time - film section
Speed at 20 sec. dev. time - polyester section
Max. format (set by imagesetter)
Dev./fix./wash temperature range
Exhaust blower
Exhaust connection
Circulation rate dev., fix., wash
Circulation rate act., stab., wash
Water consumption (operate)
Emission of heat to room (operate)
Water connection
Drain connection
Replenishment containers
Max. power consumption
Average power consumption
Power save
Night mode
Power supply:
1 x 230ACV +/-10% / 50/60 Hz
3 x 230ACV +/-10% / 50/60 Hz

Filter for developer is standard.
91 cm/36"
29 l/6.6 US gal.
16 l/4.2 US gal.
44 cm/17.3"
20 cm/7.9"
15-90 sec.
88 cm/min./34.6"/min.
60 cm/min./23.6"/min
86 x 121 cm/34 x 47"
20-45°C/68-113°F
Built in
Ø 10 cm/3.9"
22 l/min./5.8 US gal.
10 l/min./2.7 US gal.
3.5 l/min./0.9 US gal.
3000 W/879 BTU/hr
¾" pipe thread
6 x 1" hose nipple
4 x 30 l/8.1 US gal.
9400 VA
6200 W
3500 W
1100 W

40 amp
3 x 16 amp
Accessories Order no.
Pump kit for filter EG 320468
Filter for fixer 320467
Double filter with pump for developer 320465
Filter with pump for wash 128157 / 136157
Fix spray bar kit 136315
Daylight inlet kit with sensor
Floor drip tray 324826
Drip tray for racks 320043
Rack hoist 315009
Rack hoist fixing brackets set 305199
Lifting bar for rack hoist 320056
Mobile rack drip tray 136850
Chilling unit dip tube 217516
Filter cartridge for developer/fixer 10µ 75119
Filter cartridge for developer/fixer 25µ 75117
Filter cartridge for developer/fixer 1µ 75118
Filter cartridge for wash 20µ 5gr 75108
Water inlet filter kit 217759
Exhaust blower 250199
Developer replenish container 30 l. SU 217049
Fixer replenish container 30 l. SU 217059
Fixer replenish container 70L 68521
Dev. repl. container 30 l with level alarm 305549
Fix. repl. container 30 l with level alarm 305559
Level alarm sensor (low) 305529
Level alarm sensor (full) 305530
Trolley for replenishment containers 305600
Installation kit 217659
Receiving tray 136485
Product illustration


Installation drawing 47 KB


Product leaflet 128 KB

For printed leaflets please contact
Echo Graphic.
To download product illustrations (PDF), you need the Adobe Acrobat Reader software.
Specifications are subject to be changed without prior notice and we assume no responsibility for possible errors or omissions in the text. Actual achievable production speed depends on exposure, film type and chemistry, and the drying capacity is influenced by temperature, humidity, exhaust system and film type.
ECHO GRAPHIC A/S • HAANDVAERKERVEJ 2 • DK-9560 HADSUND • DENMARK • PHONE +45 98 57 19 55 • FAX +45 98 57 15 91