|
Accessories for Hope/Carnfeldt processors |
|
|
|
|
|
 |
|
Rack hoist
The rack hoist enables one person to lift out the racks from the processor for regular
maintenance and cleaning. The rack hoist is mounted on the side of the processor and is
easy to operate. Standard height: 179-209 cm.
Extra
Rack hoist fixing bracket set:
Lifting bar for rack hoist: |
|
Order no.
EG 751/GL 291/EGP 751:315009
EG 901/GL 361/EGP 901:320009
EG 1141/EGP 1141: 330009
EG 1371/GL 541: 340009
Extra
All two-frame models: 305199
EG 751/GL 291/EGP 751:128752
EG 901/GL 361: 320056
EG 1141/EGP 1141: 330006
EG 1371/GL 541: 155757 |
|
| |
|
|
| |
|
|
Rack hoist
The rack hoist enables one person to lift out the racks from the processor for regular
maintenance and cleaning. The rack hoist is mounted at the corner of the processor and is
easy to operate. Standard height: 179-209 cm.
Extra
Rack hoist fixing bracket set:
Lifting bar for rack hoist: |
|
Order no.
EG 750/EP 750: 316020
EG 900/EP 900: 320019
EG 1140/EP 1140: 330019
Extra
All one-frame models: 305299
EG 750/EP 750: 128752
EG 900/EP 900: 320056
EG 1140/EP 1140: 330006
|
|
|
|
|
|
 |
|
Mobile rack drip tray
To prevent spillage of chemicals when transporting the racks from the processor to
e.g. a sink for cleaning. The mobile drip tray makes transport of racks easy. |
|
Order no.
EG 751/GL 291/EGP 751:129850EG 751/GL 291/EGP 751:129850
EG 750/EP 750: 129850
EG 901/GL 361/EGP 901:136850
EG 900/EP 900: 136850
EG 1141/EGP 1141: 330850
EG 1140/EP 1140: 330850
EG 1371/GL 541: 155850 |
|
|
|
|
|
|
|
Drip tray for racks
Prevents spillage of chemicals when removing racks from the processor for cleaning. |
|
Order no.
GL 171: 117643
GL 291: 128643
GL 361: 136643
EG 751/EG 750/EP 750: 315043
EG 901/EG 902/EGP 901:320043
EG 900/EP 900: 320043
EG 1141/EGP 1141: 330643
EG 1140/EP 1140: 330643
EG 1371/GL 541: 155643
EG 1661/GL 651: 650121 |
|
|
|
|
|
|
|
Floor drip tray
By initially placing the processor on a drip tray spillage of chemistry on the floor
is prevented. |
|
Order no.
GL 291: 129281
EG 751/EG 750/EP 750:315281
EGP 751/GLP 291: 324726
EG 901/EG 902/GL 361:320291
EG 900/EP 900: 320291
EGP 901/GLP 361: 324826
EG 1141/EG 1140/EP 1140: 330291
EGP 1141: 330296
EG 1371/GL 541: 155884
Other sizes for GL processors etc. Available
on request. |
|
|
|
|
|
|
|
Rack hoist
The mobile rack hoist enables one person to lift out the racks from the processor for
regular maintenance and cleaning. It includes a drip tray to prevent spillage of chemicals
when transporting the racks to the sink for cleaning. Standard height: 222-242 cm. The
rack hoist can be parked over a film processor. |
|
Order no.
EG 751/GL 291/EGP 751:128738
EG 750/EP 750: 128738
EG 901/GL 361/EGP 901:136738
EG 900/EP 900: 136738
EG 1371/GL 541: 155738
EG 1661/GL 651: 650738 |
|
|
|
|
|
|
|
Receiving tray -
receiving flip
A receiving tray is collecting the film in nice piles. |
|
Order no.
Please contact Echo Graphic for
further information.EG 751PCB : 128480
EG 901PCB : 136480
EG 900/901 Purup B1/B2 : 136807
EG 900/901 Dolev 800 : 136485
EG 900/901 Primeset. 74 : 136469
EG 1140/1141 Primeset.102: 330469
GL 541 : 155487
GL 651 : 650467 |
|
|
|
|
|
|
|
Replenishment container
Repl. container for dev. and fix. Available in 30 l
and 70 l. |
|
Order no.
30 l:
For developer: 217049
For fixer: 21705970 l:
For developer: 68844
For fixer: 68521 |
|
| |
|
|
| |
|
|
Repl.
container 30 l with low level alarm sensor
Repl. container for dev. or fix with low level alarm sensor |
|
Order no.
All EG, EP and EGP models
Dev. repl. container: 305549
Fix. repl. container: 305559 |
|
| |
|
|
| |
|
|
Waste cont. 30L Level alarm
w. level
alarm sensor (full)
If the level in the waste containers is too high the sensor
starts an alarm and stops the replenish pumps. |
|
Order no.
All EG, EP and EGP models
Waste: 305569
|
|
|
|
|
|
|
|
Trolley for replenishment containers
For easy transport of replenish containers a trolley is available. The replenish
trolley includes two 35 l containers. |
|
Order no.
For all models: 305600 |
|
|
|
|
|
|
|
Daylight cassette
When processing off-line a daylight cassette can be recommended. Film is buffered in
the cassette from the imagesetter and manually transported to the daylight cassette on the
processor.
The cassette is mounted at the inlet of the processor. |
|
Order no.
EG 751 Dolev 450: 317319 |
|
|
|
|
|
|
|
Daylight cassette
When processing off-line a daylight cassette can be recommended. Film is buffered in
the cassette from the imagesetter and manually transported to the daylight cassette on the
processor.
The cassette is mounted on top of the processor - above the developer section |
|
Order no.
EG 901 Primesetter 74: 320887
EG 1141 Primesetter 102:330887 |
|
|
|
|
|
 |
|
Off-line adapter - Heidelberg
The off-line adapter with power supply is necessary when processing off-line in
order to empty the cassette. At the
EG 901 and the EG 1141 the adapter is incorporated on top of the wet section. At
the
EGP 901 and EGP 1141 the adapter is incorporated on the lid of the conveyor lid. |
|
Order no.
EG 901: 464010
EG 1141: 464510
EGP 901: 464030
EGP 1141: 464530
|
|
|
|
|
|
|
|
Daylight inlet kit
Allows daylight film to be feed manually into the processor from the top of the
processor. Often used when the processor is installed through darkroom wall. The system
includes a control unit with no-feed lamp, manual start and manual replenishment. |
|
Order no.
EG 750 Dolev 250/450/4press: 316709
EG 751 Dolev 450/4pressV: 315709
EG 900 Dolev 800V: 320713
EG 901 Dolev 800V: 320712
EG 900 Purup B1/B2: 320711
EG 901 Purup B1/B2: 320708
EG 900 Primesetter 74: 320709
EG 901 Primesetter 74: 320709
EG 1141 Primesetter 102: 330709 |
|
|
|
|
|
|
|
Rewash inlet kit
The rewash inlet kit gives you the possibility to wash and dry film after correction or
etching. The system includes a control
unit with no-feed lamp, manual start and manual replenishment. A hole must be cut in the
lid of the processor. |
|
Order no.
EG 751: 315719
EG 901: 320719 |
|
|
|
|
|
|
|
Feed
tray/daylight cassette for EG
When processing off-line a feed tray/daylight cassette can be mounted on the
off-line processor. The daylight cassette enables
processing of film in daylight surroundings. |
|
Order no.
EG 750/EG 751: 320650
EG 900/EG 901: 320650
|
|
|
|
|
|
|
|
Exhaust blower
As chemical fumes are hazardous and very corrosive, effective exhaust and ventilation
from the processor are important. Proper ventilation prevents corrosion both in the
processor and in other equipment. The exhaust blower is normally built in, but in
cases where the hose is longer than 6 meter an extra unit is needed. This unit delivers
300 m3/hour and is delivered with six meter hose. |
|
Order no.
For all models: 250199 |
|
|
|
|
|
|
|
Filter with pump for developer or fixer
Single developer or fixer filter with an extra circulation pump. To be used where the
highest obtainable quality is necessary, when the liquid contains particles or where the
developed material leaves dust particles (especially phototypesetting paper). |
|
Order no.
For developer or fixer:
3/4" hose: 128147
5/8" hose: 136147
Replacement cartridge:
25µ: 75117
10µ: 75119
1µ: 75118 |
|
|
|
|
|
Filter with pump for wash
Single wash filter with an extra circulation pump. Yo be used where the highest
obtainable quality is necessary, when the liquid contains particles or where the
developed material leaves dust particles (especially phototypesetting paper). |
|
Order no.
For wash:
3/4" hose: 128157
5/8" hose: 136157
Replacement cartridge:
20µ 5gr.: 75108 |
|
|
|
|
|
|
|
Double filter with pump for developer
Double developer filter with an extra circulation pump. To be used where the highest
obtainable quality is necessary, when the liquid contains particles or where the
developed material leaves dust particles (especially phototypesetting paper). |
|
Order no.
For developer
EG models:
5/8" hose: 320465
(for EG XX0)
5/8" hose: 320464
(for EG XX1)
GL models:
3/4" hose: 128145
5/8" hose: 136145
Replacement cartridge:
25µ: 75117
1µ: 75118 |
|
|
|
|
|
|
|
Filter cartridge
Filter cartridges are available in four finenesses: |
|
Order no.
25 µ (dev. or fix.): 75117
10 µ (dev. or fix.):
75119*
1 µ (dev. or fix.): 75118
20 µ 5 gr.(wash): 75108
(*standard in al EG xx1 and EG xx2) |
|
|
|
|
|
|
|
Filter for developer or fixer
Single filter for developer or fixer. Used where the highest obtainable quality is
necessary, when the liquid contains particles or where the developed material
leaves dust particles (especially phototypesetting paper). |
|
Order no.
For developer or fixer
EG models:
5/8" hose: 320467
(for EG 90x and EG 1411)
3/4" hose: 315467
(for EG 750 and EG 751)
GL models:
5/8" hose: 128167
3/4" hose: 128168 |
|
|
|
|
|
|
|
Water inlet filter kit
Used to rinse incoming water for particles. |
|
Order no.
For wash:
20µ: 217759
Replacement cartridge:
20µ 5gr.: 75108 |
|
|
|
|
|
|
|
Pump kit 5/8" for filter EG
An extra circulation pump for the standard filter installed in EG processors. |
|
Order no.
For all models: 320468 |
|
|
|
|
|
|
|
Installation kit
To ease installation a complete
installation kit containing all needed tubes, cable, hoses etc. is available. |
|
Order no.
For all models: 217659 |
|
| |
|
|
|
|
Spray bar kit
To obtain a uniform fixering and in order to prevent crystallization a spray bar kit
can be mounted. The spray bar kit is suitable for chemistry, which easily oxidize. |
|
Order no.
EG 1371/GL 541 unitrac: 155809
EG 1661/GL 651 unitrac: 650809 |
|
|
|
|
| |
|
|
Chilling unit dip tube
When the ambient temperature is high a chilling unit can be installed in order to
secure the correct temperature in the developer tank. By installing a chilling unit the
best result is obtained. |
|
Order no.
For all models: 217516 |
|
|
|
|
|
|
|
Level
alarm sensor (low)
When the sensor is connected to the processor’s control box it
starts an alarm and stops the replenish pumps when the level in the
replenishment container is too low. |
|
Order
no.
Level alarm sensor
All EG, EP and EGP models: 305529
(only
the sensor) |
|
| |
|
|
| |
|
|
Level
alarm sensor (full)
If the level in the waste containers is too high the sensor
starts an alarm and stops the replenish pumps. |
|
Order
no.
Level alarm sensor
All EG, EP and EGP models: 305530
(only the sensor)
|
|
| |
|
|
Automatic drain valve kit EG
If
the processor is to be
set up for automatic
drain of the wash tank.
To be used only with the
Celis Control.
When install the
processor can be drained
automatic up to 2 X/day 7
days/week. |
|
Order
no.
Automatic drain valve kit EG
All EG, EP and EGP models: 305910
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|